Home / News / Industry News
  • Storage Conditions For Rubber Rings

    Storage conditions for Rubber Rings : 1. Temperature: 5-25℃ is the ideal storage temperature. Avoid exposure to heat and sunlight. Seals taken out from low-temperature storage should be placed in an environment of 20°C before use. 2. Humidity: The re...

  • What Are The Material Classifications Of Pe Gasket?

    The part of Pe Gasket between the connector and the nut is generally a flat metal ring. Next, let's take a look at the material classification of Pe Gasket? 1. Non-metallic gaskets: gaskets made of non-metallic materials such as asbestos, rubber, syn...

  • Scope Of Application Of Plastic Balls

    Plastic balls are suitable for making various industrial, agricultural, and civil plastic products. For example, polyethylene film has been widely used as packaging bags for various foods and medicines. Polyvinyl chloride film has been widely used as...

  • Rubber Rings Manufacturers Introduce O-ring Compression Rate Method

    Rubber Rings Manufacturers introduced that when selecting the compression rate of O-rings, the following three aspects should be considered: 1. There must be enough sealing contact area; 2. Friction as small as possible; 3. Try to avoid deformation. ...

  • Why Does PE Gasket Fail?

    Reasons for PE Gasket Failure: 1. The uneven pressing force is caused by many factors. The first is the human factor. Asymmetrical preloading of bolts during construction can easily cause unevenness. This factor can be eliminated during construction....

  • Polishing Production Process Of Plastic Balls

    Polishing production process of Plastic Balls : 1. Design and develop plastic balls and plastic ball molds, arrange them reasonably, calculate the shrinkage rate of plastic balls and plastic balls, and control the roundness of plastic balls when prod...

  • Matters Needing Attention In The Use Of Rubber Rings

    Matters needing attention in the use of Rubber Rings : 1. Before installation, check the quality of the pipe fittings and rubber sealing ring, clean the dirt on the socket and the socket, and then install the rubber ring in the socket groove without ...

  • How To Scientifically Improve The Service Life Of Pe Tubes

    How to scientifically improve the service life of Pe Tubes : 1. It is the main raw material. The top domestic PE raw materials can basically achieve anti-aging for 50 years. However, due to the different needs of customers, not many PE pipes are made...

  • Plastic Balls Supplier Introduces The Main Function Of Throwing Plastic Balls

    Plastic Balls Supplier introduces the main functions of throwing plastic balls:   (1) The foam plastic ball is bounced by the sounding fork, indicating that the tuning fork is vibrating. This phenomenon indicates that the sound is produced by the vib...

  • What Are The Cover Forms Of The Lotion Pump?

    Cosmetic lotion, this type of product has a water content of about 10% to 80% and has a certain fluidity. Emulsion cosmetics occupy a certain share in the cosmetics market, therefore, the market consumption of cosmetic packaging lotion bottles is als...

  • Rubber Rings Manufacturers Introduce What Materials Are Commonly Used In Rubber Gaskets?

    Rubber Rings Manufacturers introduce the main products of rubber gaskets: O-ring gaskets, silicone gaskets, Buna-N gaskets, neoprene gaskets, EPDM rubber gaskets, fluorine rubber gaskets, and other rubber gaskets piece.   Commonly used materials are ...

  • What Are The Basic Functions Of The Lotion Pump?

    The basic functions of the Lotion Pump are as follows:   1. Sealing function. All consumers believe that they do not want to accept a product whose contents have been leaked. After the lotion pump head and bottle are charged and packaged, the sealing...