In terms of material, the main products of Pe Gasket rubber pads are silicone pads, nitrile rubber pads, fluororubber pads, and other rubber pads. Rubber gaskets have the properties of oil resistance, acid and alkali resistance, cold and heat resista...
Before the invention of the foam pump, the foam was usually sprayed by aerosol products, that is, the spray was expanded to form a foam with liquefied gas, or the sprayed colloid was used to form a foam with a post-foaming agent. The characteristic o...
Gaskets are mechanical seals between two objects, usually used to prevent pressure, corrosion, and natural thermal expansion and contraction of pipes between two objects and leakage. Since the machined surface cannot be perfect, the irregularities ca...
High-pressure seals and supports are often stored as spare parts for extended periods of time. The physical properties of most rubber materials will change during storage and eventually can no longer be used, such as too hard, too soft, cracks and cr...
How to use Pe Tubes : 1. Before pipeline connection, the pipes, fittings, and ancillary equipment should be checked according to the design requirements, and visual inspection should be carried out on the construction site, and they can be used only...
Advantages of Rubber Rings : 1. The sealing ring is an elastic rubber sealing ring acting in the axial direction, which is used as a pressureless seal of the rotating shaft. The sealing ring has good mobility and adaptability, can compensate for larg...
Lotion Pump Manufacturers describe the process of using the perfume applicator: 1. Press lightly when spraying perfume. Do not spray repeatedly, just spray once and let the fragrance settle on your clothes or body naturally. Perfume should not be spr...
Quality and Product Features of Lotion Pump : 1. Quality description: 1. After assembling and matching with the bottle filled with water, prevent liquid leakage. 2. Good sealing, uniform spray volume, strong corrosion resistance, good exhaust functio...
Many people may be unfamiliar with the material of PE pipe, but the PE among them is polyethylene plastic. When it comes to the application of this product in daily life, everyone will be very familiar with it, such as the plastic wrap and plastic ba...
The design of the Lotion Pump is also constantly innovating. From the early plastic cover and squeeze cover to the later spray pump, each time is to better store cosmetics and facilitate people's use. So what we mainly understand today is the advanta...
Rubber Rings Manufacturers introduce a good way to remove rubber smell: 1. If there are some products made of rubber indoors, the best and easiest way to remove the smell is to open the windows for ventilation, or directly put the rubber products out...
Overheating of the Pe Gasket is usually caused by the unfavorable conditions of excessive heat generation of the sealing surfaces of the centrifugal pump. Teflon O-rings turn blue or black, and O-rings harden and crack. The condition near the sealing...
Login
Mob : +86-13484228840
Tel : +86-0574-62030456
E-mail :