Steel Balls are mostly used in precision bearings, bicycle and auto parts, slide rails, recirculating ball screws, pumps, sprayers, milling machines, and other applications. The surface enhancement (also called pressurization) of the steel ball is wi...
The use and performance of Plastic Balls : Performance: The hardness is between 80 degrees and 90 degrees, and the density is 0.93g/cm³. It can float on water and can be used in the fields of food and medicine. Uses: Can be used as plastic floats, dr...
PP Plastic Balls Manufacturers introduces 2 common classifications of plastic balls: 1. PA plastic ball, polyamide plastic ball, also called nylon plastic ball, characteristics: acid, alkali, corrosion, high mechanical strength. It has good wear resi...
Rubber Rings Manufacturers introduces the purchase requirements of seals: 1. Working pressure: high pressure, low pressure, with or without hydraulic shock, with or without pressure holding requirements.2. Workplace: indoor or outdoor, with or withou...
PE Gasket Wholesalers introduced the sealing gasket installation requirements: 1. The gasket and flange sealing surface should be cleaned, and there should be no scratches, spots, and other defects that affect the sealing performance of the connectio...
PE Tubes installation requirements1. Before construction, do a visual inspection of the pipes, fittings, etc., and those that are found to be problematic cannot be used. 2. Due to the lightweight of the HDPE pipe body, it can be moved manually during...
According to Glass Ball Manufacturers, the raw material for making glass balls can only be glass, which is industrially produced. The raw materials are mainly quartz sand, feldspar, calcite, mirabilite, etc. These ores must be heated to over 1,000 de...
Rubber Rings Manufacturers introduced that rubber materials have excellent heat resistance, cold resistance, ozone resistance, and atmospheric aging resistance. Has very good insulation properties. However, the tensile strength is worse than that of...
Nowadays, the concept of environmental protection has been reflected in people's bones. Therefore, many companies are advocating environmental protection, especially for the packaging industry, which is now widely used, and it is even more necessary...
Features of POM Plastic Balls :(1) POM does not need to be dried before processing. It is best to preheat (about 80°C) during processing, which is good for the dimensional stability of the product.(2) The processing temperature of POM is very narrow...
The performance and use of PP Plastic Balls: Performance: The hardness is between 80 degrees and 90 degrees, the density is 0.93g/cm³, and it can float on water. It conforms to the US FDA certification and can be applied to the food and pharmaceutic...
The raw materials for Solid Glass Ball are mostly natural ores. Therefore, to manufacture glass balls, firstly, various ores are crushed and processed into a powder. Then, according to the glass composition, a batch is made, which is sent to a glass...
Login
Mob : +86-13484228840
Tel : +86-0574-62030456
E-mail :