Glass Ball Manufacturer describes how to reduce the wear of Glass Ball: 1. Be careful not to scratch the surface. Wash the surface with clean water at the end of use. If the surface is dusty and easy to remove dirt, you can wash it with a weak...
Pe Tubes Factory introduces that polyethylene pipes have rare special flexibility and excellent scratch resistance, simple movement, and mixed bending. When the pavement subsides and dislocation occurs, it is not easy to crack and cause damage,...
Does Rubber Rings Factory introduce how to make the surface of rubber products smooth? 1. Use lubricants, such as silicone oil, talcum powder, fatty acid powder, etc. However, the rubber treated in this form will contaminate contact during use...
Precautions for installing Pe Gasket : 1. The sealing line or the sealing surface of the Pe Gasket surface must not be damaged. The plane seal can rely on the upper and lower end faces. The sealing performance of the hydraulic seal is mainly th...
Sealing rings are widely used in today's life, so below, Rubber Rings Manufacturer will introduce 8 characteristics of sealing rings: 1. The stress relaxation resistance of the seal The sealing gasket should have good resistance to stress relax...
Does Rubber Rings Wholesaler explain how to properly store rubber O-rings? 1. Temperature: 5-25℃ is the ideal storage temperature. Avoid contact with heat sources and sunlight. The seals taken out from the low-temperature storage state should be pla...
The selection of the compression rate W of the rubber O-ring should consider the conditions of use, static seal or dynamic seal; static seal can be divided into a radial seal and axial seal; the leakage gap of a radial seal is a radial gap, and the l...
PE gasket is a non-toxic, odorless, odorless, and independent bubble-free gasket. The following Plastic Balls Manufacturer introduces the advantages and production requirements of PE gaskets: 1. Advantages (1) It has a pearly luster and a clea...
A sealing gasket is a kind of sealing spare parts used for machinery, equipment, and pipelines as long as there are fluids. Use internal and external materials that play a sealing role. Here are the precautions for installing Pe Tubes : 1. The...
The melting point of Pe Gasket is 92℃, and its physical properties are odorless, non-toxic, and feel like wax. It has excellent low-temperature resistance, good chemical stability, and can withstand most acids and alkalis. It is insoluble in general ...
Glass Ball Manufacturer introduced that the raw material for making glass balls can only be glass. Glass is industrially produced. The raw materials are mainly quartz sand, feldspar, calcite, Glauber's salt, etc. These ores must be heated to more tha...
Steel Balls Wholesaler introduces the matters needing attention in the production of steel balls: First of all, the stainless steel ball production process requires attention to detail. Process management details will have a great impact on th...