Pe Tubes maintenance strategy:
2. PE pipes should be stacked horizontally on a flat mat. The width of the mat should not be less than 75mm, the spacing should not be greater than 1m~1.5m, the overhang of the two ends of the pipe should not exceed 0.5m, and the stacking height should not exceed 1.5m. The pipe fittings are stacked layer by layer and should not be stacked too high.
3. Pay attention to anti-blocking. Drain pipes and sewage pipes are often blocked. One of the reasons for the blockage is that a certain part of the water pipe is stuck by a foreign object. Blocked water pipes not only trouble our lives but also cause excessive local pressure in the water pipes, which affects the service life of the water pipes. To avoid clogging, we can add a floor drain at the outlet of the drainpipe to prevent excessive foreign matter from entering the water pipe.
4. In order to prevent the PE pipe from being exposed to the sun for a long time or too cold, please do not place the exposed water pipe or wrap the exposed area with insulating materials. In the cold winter, the water in the water pipe should be drained at night. If it is a gas PE pipe, it must be covered underground. Because the underground temperature is relatively stable, it will not cause unnecessary loss of PE pipe fittings due to weather.